Analysis: Card removal pin Card remover High Speed Press is suitable for punching card removal pins: the thickness of the raw material steel coil is selected as thin material, and the mobile phone ejector is punched with stainless steel thin coil material, which is relatively thin. It is usually easier to obtain a smooth surface when punching thin materials, and it is easier to be cut and formed;
When punching thin materials with Card removal pin Card remover High Speed Press, the gap between the stamping parts and the die is small. Since the gap value and the gap range are very small, the manufacturing quality of the stamping parts and the precision of the press are quite high. The most obvious and direct advantage of High Speed Precision Press is its high precision, which is more than enough to control the precision in the punching of thin materials;
In addition, the rebound elasticity of thin materials is greater than that of thick materials, which will reduce the punching precision, and there may be problems such as scratches and cracks. The needle of the ejector is fine and the processing precision is high, so this also considers the technical content of Card removal pin Card remover High Speed Press itself.
Analysis of the hardness of stamping materials shows that the raw material hardness of the card removal pin is suitable, which is very suitable for stamping with the Stainless steel ejector thimble mobile phone accessories fully automatic production line. The material and the machine match to achieve better results. Because if the material is too hard, it is often more difficult to cut and shape during processing, which will increase the loss of the mold because the mold needs more force to shape the hard material. At the same time, the difficulty of processing will also increase, and more advanced equipment or technology may be required to cope with the processing of hard materials; and if the material is too soft. Although soft materials are easier to process, they are more likely to deform during or after processing due to their lack of sufficient hardness. This deformation may not meet the requirements of the final product, so special attention should be paid.
The shape of the sheet pin stamping parts is simple, and the Card removal pin Card remover High Speed Press can process complex products with high precision and difficulty. For simple stamping parts such as mobile phone card removal pins, which are flat products, the simple shape directly reduces many complex processes and steps, and the stamping speed and stamping efficiency are very fast, and the direct improvement effect is very obvious.
1. From the perspective of molds: The needles of needle stamping parts are sharp, and the molds are prone to cracking and deformation. Thin materials with narrow edges and slender strips are stamped. This kind of stamping parts has higher requirements for molds. It is necessary to choose molds with high precision, strong anti-crack performance and strong wear resistance. This kind of mold is matched with the corresponding high-quality High Speed Precision Press for production. High Speed Press stamping stainless steel high hardness card remover card needle has extremely high production efficiency. The good combination maximizes and improves the benefits.
2. From the continuous expansion of the market output of card removal pins: As an essential tool for daily use by design users, the market demand for card removal pins is large, and the demand is also increasing year by year. Card removal pin Card remover High Speed Press is suitable for enterprises that need to mass-produce card removal pin products, and is suitable for products that need to invest a large amount of planned production, because the cost of high-speed stamping equipment is high.
3. From the casting analysis of High Speed Precision Press: Punch castings are a highlight of our products. Compared with other manufacturers' castings, which are usually cast in Hunan, our Card removal pin Card remover High Speed Press castings are produced by Taiwanese foundries in Guangdong, and undergo rigorous processes such as annealing and vibration stress relief to ensure long-term accuracy. Such high-quality castings not only have significant advantages in quality compared to Hunan castings, but also have a considerable price difference, about 5,000 to 8,000 yuan. We are willing to provide our foundry information so that customers can better understand the advantages of our castings.
4.. The surface quality requirements of card removal pin products are high. High-speed precision punching machines not only have fast stamping speeds, but also high stamping surface quality. Card removal pins are one of the precision parts of mobile phone accessories. For smart products such as mobile phones, good surface quality of stamping parts will be the best choice. In the process of stamping products, our common burrs, cracks, and sand holes are the reasons for the surface finish and unevenness of stamping parts, and the contour quality is not accurate and relatively poor.
5.Analysis of the configuration of the card removal pin High Speed Precision Press: Card removal pin Card remover High Speed Press is equipped with a corresponding roller feeder. Each time the punch press punches, it can accurately feed the die into the die according to the specified step distance for punching. The two feeder brands we currently provide are Pengda and Leicheng. The cost of the Leicheng brand is relatively high, about 3,000 yuan more expensive than Pengda. Customers can choose a suitable brand according to their specific needs, and the accuracy requirement of the feeder is ±0.01mm. Appendix: When choosing a feeder, you should refer to the material parameters and check the "High-speed Roller Feeder Specification Table" to correctly and accurately choose the appropriate machine.