Characteristics of precision metal stamping parts stamped by gantry high-speed precision punch press can be simply answered from the aspects of workpiece processing accuracy, workpiece thickness, workpiece shape and weight.
1. The processing accuracy of precision metal stamping parts can reach 0.02mm. The high-precision effect of precision metal stamping parts can intuitively reach the micron level. Intelligent control system and intelligent display, adjustable parameters, stamping parts produced by automated equipment have high repetition accuracy, high product consistency, tolerance requirements between 0.01-0.1mm are common standards, and the interchangeability of finished products is good. The precision tolerance of stamping parts produced by manual operation varies widely, and the unreliability of manual operation is large, resulting in low precision of stamping parts. High precision is one of the most obvious and direct characteristics of characteristics of precision metal stamping parts stamped by gantry high-speed precision punch press.
2. The overall thickness of precision metal stamping parts is relatively thin. Stamping parts made of thin metal coils are relatively thin because the coils are thin and the molds and Open single point C type 65 ton LED metal bracket bracket workpiece automated high-speed punch small tonnage bearing press are highly controllable. Therefore, the thickness of stamping parts is relatively thin. Usually, the thickness of stamping parts is between 0.1mm and 6mm. For example, the thickness standard of stainless steel stamping parts is commonly 5mm or less than 6mm. Thickness exceeding this is considered thick, and thickness below 0.2mm is considered thin.
3. The shapes of stamping parts are varied and varied. Precision metal stamping parts are usually varied in shape according to the applicable occasions and the applicable equipment. They are square, oval, sheet, trapezoidal, curved, or a composite shape composed of various shapes. Of course, a single shape is also common. For example, 80 tons of small special-shaped switch shrapnel hardware precision stainless steel phosphor bronze shrapnel riveted shrapnel electronic motor shrapnel CNC high-speed punch press are used to stamp metal shrapnel. The shape of the shrapnel is ever-changing.
4. Precision metal stamping parts are generally light in weight and lightweight. When purchasing metal steel or copper materials, manufacturers generally choose raw materials with stable materials. Precision metal stamping parts can generally be produced using coils. They do not require large pieces of thick metal materials, and the amount of consumables is small. In addition, some waste materials are removed after the materials are processed. Later, due to the requirements of the finished product characteristics of the stamping parts, the weight of precision stamping parts is generally light.
In general, judging from the characteristics of precision metal stamping parts stamped by gantry high-speed precision punch press, the advantages of stamping parts are very obvious, the production process is more automated and mechanized, and the surface integrity rate of the finished products is high.
