What is the stroke adjustment method of high-speed punch press? The high-speed punch press has an important part, which is the crankshaft. The eccentricity of the crankshaft is related to the stroke of the punch press. The stroke of the high-speed punch press refers to the length of the up and down displacement of the high-speed punch press slider, that is, the running distance from the upper dead point to the lower dead point of the punch press. The distance between the slider of the punch press and the workbench of the punch press is usually measured in millimeters. The high-speed operation of the slider of the high-speed punch press is one of the functional accessories formed during the stamping process of the product. The stroke parameters of the punch press directly affect the size and shape of the workpiece.
What is the stroke adjustment method of high-speed punch press? The stroke of the punch press can be adjusted according to the size of the workpiece. The smaller the size of the workpiece, the slower the adjustment speed. On the contrary, the larger the size of the workpiece, the faster the adjustment speed. When the pressure head descends, the lower dead point position is adjusted to control the depth of the stroke. The stroke adjustment of the punch press can be divided into manual adjustment and automatic adjustment. By loosening the bolts, the displacement distance of the up and down movement of the punch press workbench can be adjusted. Automatic adjustment is generally achieved by adjusting the parameters of the control panel and then letting the program execute automatically to adjust the stroke size of the punch press. The use of measuring tools can accurately adjust the size of the stroke change. The high-speed punch press controlled by the digital system is equipped with an intuitive display and counter. Digital changes can be controlled through buttons and touch screens.
When adjusting the punch press stroke, you need to pay attention to safety issues. You cannot reach into the punching work area when feeding or the punch press is running. This is a relatively dangerous behavior. You can stop the punch press first, then turn on the power of the punch press, and then use the touch screen to adjust it. In addition, the stroke adjustment of the punch press is generally limited. For example, the samhoor 45 tons of metal fasteners pipe saddle clamps junction boxes switches stainless steel metal buckles fasteners pipe bundles fasteners gantry high-speed punch press stroke has 20 mm, 25 mm, 30 mm, and 40 mm. Generally, after selecting a punch press with a suitable stroke according to the finished product, the high-speed punch press stroke adjustment method adjusts the stroke of the punch press according to the structure and technical parameters of the punch press. The structure of the gantry high-speed punch press is a closed structure, the width of the worktable is quite large, and the stamping workpieces are usually rich and varied. It can also be designed as a corner protection net steel net corner net anti-collision net diamond net mesh round hole net automatic production line, and stamping metal mesh products.
