As an important mechanical equipment, the high-speed punch press is one of the major production costs of the enterprise and is an expensive equipment that requires a lot of money to purchase. The working environment affects the state of the high-speed punch press body, and there are certain requirements for the environment in which the punch press is placed. So what are the requirements for the environment of the high-speed punch press? To discuss the placement environment of high-precision machinery and equipment, we simply analyze it from five aspects to strengthen the attention to the rational use of high-speed punch presses and provide guarantees for the normal use of punch presses.
In what kind of environment should the high-speed punch press for bare plate nails be placed:
Ground environment:
The ground environment should be clean, with less oil, dust, and iron filings, and less waste. If there is too much waste around the punch press body and under our feet, it is easy for us to produce wrong actions, which has a great impact on the tenderness of the pedals; at the same time, the ground environment should be flat, with appropriate hardness and strength, solid enough, not loose and soft, to ensure that it can withstand the weight of the high-speed punch press body and the impact and pressure of other forces generated when the high-speed punch press is operating. Shoe spike accessories mountaineering shoe accessories two-foot nail high-speed press should also be placed in such an environment.
Light environment:
The on-site lighting should be bright but not dazzling, and the light environment should be moderate. Especially in the stamping area, there should be no shadows, and the contrast between light and dark should not be too large. And direct sunlight on the machine should be avoided.
Temperature environment:
When a punch press is operating in a workshop, the temperature generated by its high-speed operation is not low. We all know that the high temperature of the machine has a great impact on production efficiency and the life of the machine. Excessive ambient temperature can easily lead to more faults such as short circuits. Generally, a punch press is most suitable for an environment below 40 degrees Celsius. If conditions permit, it is best to keep the ambient temperature below 30 degrees Celsius.
Humidity environment:
Too low humidity can cause electrostatic electronic component failures, and too high humidity can easily cause corrosion or fire of the machine. The punch press can be kept between 40% and 60% relative humidity.
Electromagnetic environment:
If there is a large electromagnetic interference in the surrounding machines, it will affect the accuracy of the intelligence of the punch press. A large number of electromagnetic signals around should be reduced or shielded. For example, when performing stamping operations, the intelligent control box is used to control the operation of the punch press, so it is necessary to ensure that the electric control box will not be interfered by electromagnetic signals and affect the accuracy of the machine.
The above is part of the discussion on "In what kind of environment should the high-speed punch press for bare plate nails be placed?" A large number of practices have shown that the environment in which the punch press is located has a certain influence on its working efficiency. Paying attention to the environment in which the punch press is placed can reduce the damage to the punch press and maintain the stability of production efficiency.
