There are many details in the operation of high-speed punching machines. Although the punching machine is simple and quick to use, there are still many issues that need to be paid attention to. So how to adjust the mold height of high-speed punching machine? Before we adjust the height, pay attention to safety and avoid injury from impact. Before performing any operation, we must follow the rules for safe operation, then turn off the power and ensure that the equipment is in a safe state. Check whether the punch is in normal condition, wipe off contaminants and residues on the punch, reduce the load during adjustment, and prepare the tools you need to use. The slider mold height adjustment cannot be used for purposes other than mold height adjustment. The important thing to note when adjusting the die height of the punch press is that if it cannot be adjusted, do not force it. There may be abnormalities in the punch press, and forced adjustment may easily damage the equipment. After the adjustment is completed, some testing work can be performed.

Only by understanding the structure of the high-speed punch press can you perform more operations and understand the screw, gear, transmission shaft, cylinder, base, etc. of the punch press. Use a tool to loosen the screw, and use the ratchet handle to twist the adjustment lever of the slider clockwise to increase the height; conversely, turning it counterclockwise will lower the height. After the adjustment is completed, we must remember to tighten the screws, secure the screws, and retighten the previously loosened screws or fasteners to ensure that the adjusted components are tight and not loose.

In addition, if it is an electric form of mold height adjustment, we should pay attention to the changes in the display. The digital display has corresponding instructions. First, the slider must be in the ON position. If the slider is not in this position, then we need to adjust the slider to this position. While watching the changes in the indicator, adjust the height of the slider. We can adjust the corresponding height by pressing the down or up button as needed.

Finally, the specific adjustment method of how to adjust the die height of a high-speed punch may vary depending on the model and structure of the punch. We can strictly refer to the punch press operation manual for relevant operations. Adjustment of the die height of high-speed punching machines will directly affect the quality and efficiency of our stamping processing.