Using connector terminal high speed punching machine, high-speed punching machine machine to punch connector terminal parts products, there is a process that is the pre-breaking process on our products. For example, this product has this pre-segment on it. What is the pre-segment? That is to say, when we punch, we need to press a pre-break at the connection between the punch line and the material strip. At this pre-break, the concentration point of hardness, after the assembly is completed, it can be broken. The purpose of setting the pre-break is to have the following two aspects. The first one is that if it is assembled at the back of the strip, there is no space to remove it. Then, a section should be left before punching, and it can be torn off at the end. In addition, it has a cutting position after assembly, but it is harder to cut, so it is easier to cut after leaving the pre-break.
Terminal punching refers to the process of punching and stretching stainless steel by using the high corrosion resistance, high strength and smooth surface of stainless steel to obtain stainless steel stamping parts and stainless steel stretching parts of ideal size and shape. In the process of stainless steel stamping and stretching, high speed punching machine, stretching machine, welding equipment, drilling equipment and processing equipment are needed. The processing technology of stainless steel can be roughly divided into two major processes. One is forming, which means processing into the desired shape and size, and the other is surface treatment, which means electroplating, electrophoresis, painting, powder coating, oxidation and polishing of the processed stainless steel parts. The purpose of surface treatment is to make the stainless steel stamping parts and stainless steel drawing parts that have been surface treated more beautiful and more durable. The terminal stamping process uses a high speed punching machine to process stainless steel in time. When we buy stainless steel materials from the material supplier, it is not the size and shape we want. Usually there are stainless steel plates, stainless steel solid bars, stainless steel pipes, etc., so these common stainless steel profiles on the market are punched into products with suitable shapes and sizes. The process is called stamping.
The metal stamping mold setting process is to first select a connector terminal high speed punching machine suitable for the mold tonnage according to the size of the mold, then clean the work platform of the connector terminal high speed punching machine, push the mold onto the work platform, and then use the punch block to hit it to the test mold state, then use the safety rod to adjust the mold to the appropriate height, then lock the mold and fix it, and then use the inch hole to punch the inch hole. After a few punches, confirm whether the mold is normal, and then start to prepare to send it away. This is a thinning process of stamping.
Use the connector terminal high speed punching machine to process an SD push card socket shell. The material used for this card socket shell is 304. Then, during the production process of this shell, what needs to be paid attention to is whether the surface of the shell is worn, crushed, or scratched. Well, the size problem is to pay attention to the inner diameter size of the shell, the buckle point size, the height of the welding angle, and the table size. In order to ensure that the punched product is OK, we set a screen saver inspection every half an hour, and the daily production capacity of this product is about 50 to 60K.
